Blog
CNC Machining Blog
Process know-how, material guides and DfM insights from our engineering team.
2026-07-01
caseApplication Case: Aerospace Titanium Bracket CNC Machining
An aerospace titanium bracket RFQ playbook for Grade 5 titanium, 5-axis access, weight reduction, traceability and inspection.
2026-07-01
caseApplication Case: Copper C110 EV Busbar and Power Electronics Terminal
A copper busbar CNC machining RFQ playbook covering conductivity, burr control, plating, hole quality and inspection.
2026-07-01
caseApplication Case: Invar Optical Alignment Stage CNC Machining
An optics and photonics RFQ playbook for Invar 36 alignment stages, low thermal expansion, datum control and inspection planning.
2026-07-01
caseApplication Case: Drone Carbon Fiber Plate and Aluminum Motor Mount Assembly
A drone/UAV machining RFQ playbook covering carbon fiber routing, 7075 motor mounts, vibration, edge sealing and fast prototype cycles.
2026-07-01
caseApplication Case: PEEK Surgical Guide and Medical Fixture Machining
A medical PEEK machining RFQ playbook covering grade selection, sterilization exposure, edge quality, certificates and inspection.
2026-07-01
caseApplication Case: Semiconductor Vacuum Fixture CNC Machining
A semiconductor vacuum fixture RFQ playbook for aluminum tooling plates, vacuum grooves, flatness, cleaning and inspection documents.
2026-07-01
caseApplication Case: 7075 Aluminum Robot Joint Housing
A robot joint housing RFQ playbook covering 7075 aluminum, bearing bores, cable passages, anodizing and CMM inspection.
2026-07-01
caseApplication Case: AI Server Cold Plate CNC Machining RFQ Playbook
A practical RFQ playbook for CNC machined AI server cold plates with copper, sealing faces, O-ring grooves and pressure-test planning.
2026-07-01
guideSwiss Machining for Small Precision Parts: Shafts, Pins, Bushings and Micro Hardware
A guide to Swiss-type CNC machining for small precision turned parts, long slender geometry, tight diameters and production volumes.
2026-07-01
guideCNC Machining Quality Documents: CMM Reports, FAI, CoC and Material Certificates
A buyer guide to CNC machining quality documents: when to request CMM inspection, FAI, CoC, material certificates and traceability.
2026-07-01
guidePlastic CNC Machining: PEEK vs POM vs PTFE for Precision Parts
Compare PEEK, POM/Delrin and PTFE for CNC machined plastic parts, including tolerances, wear, heat, chemistry and cost.
2026-07-01
guideCopper CNC Machining for Thermal and Electrical Parts: C110, Burrs and Plating
A practical copper CNC machining guide for busbars, heat spreaders, cold plates, RF parts and high-conductivity components.
2026-06-30
guideCNC Machining for Drones and UAVs: Lightweight Structures and Flight-Test Parts
How to source CNC machined drone and UAV parts: carbon fiber plates, aluminum frames, motor mounts, brackets and vibration-critical hardware.
2026-06-30
guideStainless Steel 316L CNC Machining: Marine, Medical and Chemical Applications
A guide to CNC machining 316L stainless steel parts with passivation, corrosion requirements, tolerance and inspection considerations.
2026-06-30
guideCNC Machining Cost Drivers: What Changes Price Before You Upload CAD
Understand CNC machining cost drivers: material, tolerance, setup count, finish, inspection, quantity and delivery pressure.
2026-06-30
guideTight Tolerance CNC Machining: When ±0.005 mm Matters and When It Does Not
A practical guide to tight tolerance CNC machining, inspection planning, datum strategy and cost control.
2026-06-30
guideSurface Finish Selection for CNC Parts: Anodizing, Plating, Passivation and Polishing
How to choose surface finishes for CNC machined parts and understand tolerance impact before requesting a quote.
2026-06-30
guideCNC Prototyping to Production: How to Keep Quote Data, Tolerances and Quality Aligned
A guide to moving CNC parts from first prototype to pilot and production without losing material, finish, inspection or delivery context.
2026-06-30
guideTitanium CNC Machining Service: Grade 2 vs Grade 5, Cost and Design Rules
How to quote titanium CNC machined parts: Ti Grade 2, Ti-6Al-4V Grade 5, heat, tooling, tolerance and finishing considerations.
2026-06-30
guideMedical Device CNC Machining: Material Selection, Traceability and Inspection
A medical device CNC machining sourcing guide covering titanium, stainless steel, PEEK, passivation, traceability and inspection documents.
2026-06-30
guideCNC Machining for Semiconductor Fixtures: Clean, Stable and Documented Parts
How to source CNC machined semiconductor fixtures, vacuum plates, wafer handling parts and inspection-ready tooling.
2026-06-30
guideAluminum 6061 vs 7075 for CNC Machining: Which Alloy Should You Quote?
A practical comparison of 6061 and 7075 aluminum for CNC machined prototypes, robotics, aerospace brackets and production parts.
2026-06-30
guideAluminum 7075 CNC Machining: Strength, Anodizing and Design Rules
A sourcing guide for CNC machined aluminum 7075 parts: robotics, aerospace, drones, fixtures, tolerances and finish considerations.
2026-06-30
guidePEEK CNC Machining Design Guide: Tolerances, Applications and RFQ Checklist
How to design and quote CNC machined PEEK parts for medical, semiconductor, aerospace and high-temperature applications.
2026-06-30
guide5-Axis CNC Machining Service: When It Beats 3-Axis and How to Quote It
A practical 5-axis CNC machining service guide for complex angles, impellers, robotics housings, aerospace brackets and tight multi-face tolerances.
2026-06-30
guideCNC Machining for Robotics Parts: Lightweight, Repeatable and Assembly-Ready
A robotics CNC machining guide for joint housings, actuator brackets, gearbox plates, end effectors and structural parts.
2026-06-30
guideLiquid Cooling Cold Plate CNC Machining: Design, Tolerances and Inspection
How to specify CNC machined cold plates for servers, power electronics and AI accelerators: channels, sealing faces, flatness, leak testing and plating.
2026-06-30
guideCNC Machining for AI Hardware: Cold Plates, Manifolds and Precision Housings
A buyer-focused guide to CNC machining AI hardware: copper cold plates, aluminum housings, liquid-cooling manifolds, inspection requirements and RFQ inputs.