Fabvector Process
EDM (Electrical Discharge Machining)
Wire EDM and sinker EDM for ultra-precise features, sharp internal corners, and hardened materials. Fabrix AI stages skim passes and taper compensation while engineers monitor dielectric conditions per program.
Tolerance
±0.005mm
Lead Time
7–15 days
Cost Range
$20–800/pc
Capabilities
Max Part Size
500×350×320mm
Min Wall Thickness
0.1mm
Surface Roughness (Ra)
0.1–1.6μm
Supported Materials
P20 Tool Steel
H13 Tool Steel
D2 Tool Steel
Tungsten Carbide
Inconel 625
Inconel 718
Titanium Grade 5
Hardened Steels (60+ HRC)
Surface Finishes
As EDM
Vapor Honed
Hand Polished
SPI A2 Mirror
Texture Etched
Lapped
DFM Tips
- 1Design for wire EDM access—ensure a start hole or open edge for wire threading.
- 2Specify taper requirements explicitly as wire EDM can achieve controlled taper cuts up to 30°.
- 3Avoid unnecessarily tight corners in non-functional areas to reduce machining time and cost.
- 4For sinker EDM, plan electrode geometry considering electrode wear and re-dress requirements.
Frequently Asked Questions
Ready to get started?
Get an instant AI-powered quote or create a formal RFQ for edm (electrical discharge machining).